Linksys BEFW11S4 Wireless-B Router Console Emulator

Linksys

Firmware Version: 1.52.02  

Setup

Wireless-B Broadband Router

BEFW11S4

Browser-based emulator only. “Save Settings” stores values in this page; it does not configure a real router.

|||

Internet Connection Type Obtain an IP automaticallyStatic IPPPPoE RAS(for SingTel)PPTPHeart Beat SignalL2TP

---

Host Name:

Domain Name:

MTU:

Enable Disable   Size:

Speed & Duplex: 10 Mb Full10 Mb Half100 Mb Full100 Mb HalfAuto

---

Local IP Address:

. . .

Subnet Mask: 255.255.255.0255.255.255.128255.255.255.192255.255.255.224255.255.255.240255.255.255.248255.255.255.252

---

Local DHCP Server:

Enable Disable

Start IP Address:

192.168.1.

Number of Address:

DHCP Address Range:192.168.1.100 ~ 149

Client Lease Time:

minutes (0 means two day)

Static DNS 1:

Static DNS 2:

Static DNS 3:

WINS:

DDNS Service:DisableDynDNS.orgTZO.com

---

Dynamic DNS is disabled.

User Name:

Password:

Host Name:

Email Address:

TZO Key:

Domain Name:

MAC Clone Service: EnableDisable

MAC Address:

- - - - -

---

NAT

Enable Disable

---

Dynamic Routing

Enable Disable

Transmit RIP Version: RIP1RIP1-CompatibleRIP2

Receive RIP Version: RIP1RIP2

---

Static Routing

Select Entry:

Destination IP Address:

. . .

Subnet Mask:

. . .

Gateway:

. . .

Hop Count:

Interface:LocalInternet

---

|||

Wireless:

Enabled Disabled

Wireless Network Name(SSID):

Wireless Channel:1 - 2.417 GHZ2 - 2.422 GHZ3 - 2.427 GHZ4 - 2.432 GHZ5 - 2.437 GHZ6 - 2.442 GHZ7 - 2.447 GHZ8 - 2.452 GHZ9 - 2.457 GHZ10 - 2.462 GHZ11 - 2.467 GHZ

Wireless SSID Broadcast:

Enabled Disabled

Wireless Security:

Enable Disable

Security Mode: WPA Pre-Shared Key WPA RADIUS WEP

WPA Algorithms:TKIP

WPA Shared Key:

Group Key Renewal:

seconds

RADIUS Server:

. . .

RADIUS Port:

Shared Key:

Default Transmit Key:1234

WEP Encryption:64 bits 10 hex digits128 bits 26 hex digits

Passphrase:

Key 1:

Key 2:

Key 3:

Key 4:

Allow All

Restrict Access

Access List:

MAC 01: MAC 11:

MAC 02: MAC 12:

MAC 03: MAC 13:

MAC 04: MAC 14:

MAC 05: MAC 15:

MAC 06: MAC 16:

MAC 07: MAC 17:

MAC 08: MAC 18:

MAC 09: MAC 19:

MAC 10: MAC 20:

Wireless Client MAC List

This emulator does not inspect visitors' network devices. No live wireless clients are exposed by a normal web page.

Basic Rates: 1-2 Mbps(Default)1-2-5.5-11 Mbps

Control TX Rate: 1-2 Mbps1-2-5.5-11 Mbps(Default)

Preamble Type: Short PreambleLong Preamble(Default)

Authentication Type: Open SystemShared KeyAuto(Default)

Antenna Selection: Diversity(Default)Left Spread OnRight Spread On

Beacon Interval:

 (msec, range: 1~65535, *100)

DTIM Interval:

 (range: 1~255, *1)

Fragmentation Threshold:

 (range: 256~2346, *2346)

RTS Threshold:

 (range: 256~2432, *2432)

|

Filter IP Address Range

1:192.168.1. ~

2:192.168.1. ~

3:192.168.1. ~

4:192.168.1. ~

5:192.168.1. ~

---

Filter Port Range

1:TCPUDPBoth ~

2:TCPUDPBoth ~

3:TCPUDPBoth ~

4:TCPUDPBoth ~

5:TCPUDPBoth ~

---

Filter MAC Address

Block WAN Requests

Block Anonymous Internet Requests: Enabled Disabled

Filter Multicast: Enabled Disabled

Filter Internet NAT Redirection: Enabled Disabled

Filter IDENT(Port 113): Enabled Disabled

MAC Filter Setting

VPN Passthrough

IPSec Passthrough:

Enabled Disabled

PPPoE Passthrough:

Enabled Disabled

PPTP Passthrough:

Enabled Disabled

---

| | |

Port Range Forwarding

Port Range
Application	Start   to	End	Protocol	IP Address	Enable
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.
	to		TCPUDPBoth	192.168.1.

Port Triggering

	Triggered Range		Forwarded Range
Application	Start Port	End Port	Start port	End Port
	to		to
	to		to
	to		to
	to		to
	to		to
	to		to
	to		to
	to		to
	to		to
	to		to

UPnP Forwarding

Application	Ext.Port	TCP  UDP	Int.Port	IP Address	Enabled
FTP	21	TCP UDP		192.168.1.
Telnet	23	TCP UDP		192.168.1.
SMTP	25	TCP UDP		192.168.1.
DNS	53	TCP UDP		192.168.1.
TFTP	69	TCP UDP		192.168.1.
finger	79	TCP UDP		192.168.1.
HTTP	80	TCP UDP		192.168.1.
POP3	110	TCP UDP		192.168.1.
NNTP	119	TCP UDP		192.168.1.
SNMP	161	TCP UDP		192.168.1.
		TCP UDP		192.168.1.
		TCP UDP		192.168.1.
		TCP UDP		192.168.1.
		TCP UDP		192.168.1.
		TCP UDP		192.168.1.

DMZ

DMZ:

EnableDisable

DMZ Host IP Address:

192.168.1. 

---

|

Router Information

Firmware Version:

1.52.02, Apr 7 2005

MAC Address:

00-00-00-00-00-00

Internet

Configuration Type

Login Type:

DHCP

Internet IP Address:

0.0.0.0

Subnet Mask:

255.255.255.0

Default Gateway:

0.0.0.0

DNS 1:

0.0.0.0

DNS 2:

0.0.0.0

DNS 3:

0.0.0.0

MTU:

1500

---

    

Basic Setup

The Basic Setup screen is where basic configuration is performed. Some ISPs (Internet Service Providers) will require that you enter the DNS information.

Completing the Internet Setup section is all that is required to set up for your specific ISP.